1. Place the machine on a relatively flat ground or in a car box, carefully check whether the whole machine is loose, and pay special attention to the fact that the connection between the motor and the oil pump must be fastened and concentric.
2. Connect the power supply correctly, start the oil pump and check whether the rotation direction is correct, otherwise, change the phase sequence of the power supply.
3. Connect the oil inlet and outlet pipes and tighten them. Remind the user that the oil outlet pipe and oil outlet must be fastened. Otherwise, as the pressure increases, the oil outlet pipe will be washed away, adding unnecessary trouble.
4. After fixing the oil inlet and outlet pipes, start the motor button, the oil pump starts to work normally, and the oil filtered out through the third stage is the purified oil.
5. When one barrel (box) of oil needs to be pumped and another barrel (box) of oil needs to be pumped, it is necessary to act quickly to avoid the oil pump idling for a long time.

Technical data parameter