Home / Products / oil-filtration / BLYJ series portable oil purifier /

Portable Oil filtration Machine
Portable Oil filtration Machine
Portable Oil filtration Machine
Portable Oil filtration Machine
Portable Oil filtration Machine

Portable Oil filtration Machine

IntroductionThePortableOilfiltrationMachinetruckismainlyusedtofilter,purify,restoreorimprovetheprope

Introduction

The Portable Oil filtration Machine truck is mainly used to filter, purify, restore or improve the properties of the contaminated oil.  Including oil cleanliness, water content, gas content, acid value, viscosity, flash point, insulation grade, color, etc. The equivalent HYDAC oil purifier belongs to the series of portable oil purifiers.

Application area

Portable Oil filtration Machine:

  • Oiling and regular maintenance of hydraulic lubrication system

  • Bypass filter when the hydraulic lubrication system is working

  • Filter new oil Add and filter new oil

  • Purify oil in use

Operation

Portable Oil filtration Machine:

1. Place the machine on a relatively flat ground or in a car box, carefully check whether the whole machine is loose, and pay special attention to the fact that the connection between the motor and the oil pump must be fastened and concentric.
2. Connect the power supply correctly, start the oil pump and check whether the rotation direction is correct, otherwise, change the phase sequence of the power supply.
3. Connect the oil inlet and outlet pipes and tighten them. Remind the user that the oil outlet pipe and oil outlet must be fastened. Otherwise, as the pressure increases, the oil outlet pipe will be washed away, adding unnecessary trouble.
4. After fixing the oil inlet and outlet pipes, start the motor button, the oil pump starts to work normally, and the oil filtered out through the third stage is the purified oil.
5. When one barrel (box) of oil needs to be pumped and another barrel (box) of oil needs to be pumped, it is necessary to act quickly to avoid the oil pump idling for a long time.

Technical data parameter

ModelFCM060FCM100
Flow capacity60L/min100L/min
Operating temperature5-80℃
Viscosity range10-160cst
Operation pressure0.6MPa
Original pressure loss< 0.02MPa
First grade filtration100μm
Second grade filtration3、5、10、20、30μm
VoltageAC 380V Three-phase power, AC220V Two-phase electricity
Motor power2.2kw3kw
Weight130kg145kg
Dimension705*610*1245mm


Get a FREE Quote

RELATED PRODUCTS

Leave a message

If you want to get more details about filter and filtration equipment, you can send E-mail to filter01@lefilter.com. You can consult our professional engineer and specialized sales team with leave a message in below form. We will contact with you ASAP. You also can visit our factory in Henan China.