The fully automatic cleaning filter can achieve the best filtering effect, fully meet the requirements of the production industry, and at the same time achieve the effect of saving water and electricity. It is very important to choose the correct type. The main factors to pay attention to in the selection are:

1. Application type: such as the protection of industrial circulating cooling water.

2. The amount of water to be treated: such as 300m3/h.

3. The pressure of the pipeline at the pre-installed filter: such as 1.6Mpa.

4. Filtration accuracy: such as 200 microns.

5. Dirt particle size, particle distribution, concentration, oil content of sewage.

6. Physical and chemical properties of sewage

When selecting a filter, please consider the following factors:

1. The amount of water to be treated;

2. Pipeline pressure of the system;

3. The filtering accuracy required by the user;

4. Filter the concentration of suspended solids in impurities;

5. Relevant physical and chemical properties of the filter medium;

6. Self-cleaning filter for special purpose.

7. It can design and produce filters with various pressure ranges according to user needs; filters with a temperature as high as 95C can be produced through a special process, and a special filter control system will be used for filters that need to work under cold conditions; for Seawater is highly corrosive, and special materials such as nickel and titanium alloys are used;

8. And carry out special processing on the filter; can provide targeted solutions according to the specific working conditions and requirements of users.