1. Wind power hydraulic filter function

Mainly because of the high content of particles and moisture in the gearbox, most wind power owners are told by the manufacturer that most of the gearbox problems are caused by improper selection of oil products. In this case, problems can occur: the oil does not lubricate the gearbox adequately, or contains moisture, causing deposits, which can clog the filter, and eventually these can lead to unplanned downtime. Another common contributor to gearbox failure is improper gearbox oil changes. In the past, when industry workers chose the oil change method, they were more concerned about the oil change efficiency, which was examined by the number of oil change units per day. They all ignore the correct steps, procedures, and procedures for oil changes, causing numerous problems that ultimately lead to unplanned downtime and costly repairs.

Used in wind power hydraulic station filter element in the hydraulic system, it is used to filter out solid particles and colloidal substances in the working medium, and effectively control the pollution degree of the working medium. It can make the system quickly reach and maintain the desired oil cleanliness level and prolong the service life of the oil.

2. How to maintain the wind power hydraulic filter

  (1) The wind power hydraulic filter element is the core part of the filter. The filter element is composed of special materials and is a vulnerable part that requires special protection and maintenance.

(2) After the filter in the system works for a period of time, the hydraulic oil filter element in the filter has intercepted a certain amount of pollution impurities. At this time, the pressure increases, the flow rate will gradually decrease, and the transmitter will remind the alarm. At this time, it is necessary to To clean up the impurities in the filter element in time, the filter element needs to be cleaned.

(3) In the process of cleaning the filter element, we must pay attention that the hydraulic oil filter element must not be deformed or damaged. Otherwise, it cannot be used again, so as not to affect the filtration efficiency and cause damage to the entire system.