Introduction

The working principle of the abandoned purification tower is to separate the pollutants in the gas. Converted into harmless substances to achieve the purpose of purifying the gas. It belongs to the differential contact countercurrent type, and the packing in the tower body is the basic component of the gas-wave two-phase contact. After the gas outside the tower body enters the tower body, the gas enters the packing layer. There are spray liquid from the top and the spray liquid in the front on the packing layer, and a layer of liquid film is formed on the packing. When the gas flows through the gap of the packing , contact with the filler liquid film and carry out absorption or neutralization reaction. The filler layer can provide a large enough surface area without causing excessive resistance to the gas flow. After the absorbed or neutralized gas is collected by the demister. The air outlet is discharged out of the tower. The exhaust gas purification tower uses the contact between gas and liquid to transfer the pollutants in the gas to the liquid, and then separates the clean gas from the polluted liquid to achieve the purpose of cleaning the air. The waste passes through the waste purification tower and is treated by gas-liquid reverse absorption, that is, the liquid is sprayed down from the top of the tower in the form of mist (or small liquid droplets). The exhaust gas reaches the purpose of gas-liquid contact from the tower body (reverse flow). This treatment can cool the exhaust gas, condition the gas and remove particles, and then be discharged into the atmosphere after being treated in the demisting section.

Standard Configuration

1. Scrubber spray system; 

2. Filling layer filler; 

3. Moisture remover;

4. Inspection window and maintenance access hole;

5. Overflow, discharge and automatic replenishment water outlet;

6. Circulating water pump;

7. Circulating water filter.

Product Advantages

1. Suitable for continuous and intermittent exhaust gas treatment; 

2. The process is simple, the management, operation and maintenance are quite convenient and concise, and will not have any impact on the production of the workshop;

3. Exhaust gas purification tower has a wide range of applications and can purify multiple pollutants at the same time.

Features

1. It is suitable for the treatment of continuous and intermittent waste discharge; Abandoned purification tower

2. The process is simple, the management, operation and maintenance are quite convenient and concise, and will not have any impact on the production of the workshop;

3. Exhaust gas purification tower has a wide range of applications and can purify multiple pollutants at the same time;

4. Low pressure drop, large operating flexibility, and good defogging performance;

5. The tower body can be made of FRP/PP/PVC and other materials according to the actual situation;

6. The packing adopts high-efficiency, low-resistance Pall ring.

Scope of Application

Exhaust gas purification tower is widely used in organic waste gas, sulfuric acid, Nitric acid, hydrochloric acid, and other exhaust gases and acid gases such as sulfur oxides (SOx), nitrogen oxides (NOx), and carbon oxides (CO, Co ).

Product Parameters