Side plug-in filter cartridge pulse dust collector function:
The side-inserted filter cartridge pulse dust collector does not require the cartridge type to adopt the upper and lower structure. The filter cartridge dust collector is composed of an air inlet pipe, an exhaust pipe, a box body, an ash hopper, a dust cleaning device, a filter cartridge and an electric control device. Similar to the air box pulse bag dust removal structure.
Side plug-in filter cartridge pulse dust collector product features:
1. The filter cartridge uses imported polyester fiber as the filter material, and a layer of sub-micron ultra-thin fibers is adhered to the general filter material, and the fibers are arranged very closely on the adhesion layer, and the extremely small mesh can Block most of the sub-micron dust particles on the surface of the filter material.
2. The filter material is wrinkled, which can increase the filter area and make the structure of the dust collector more compact.
3. The height of the filter cartridge is small, and the workload of installation and maintenance is small.
4. Compared with the dust collector of the same volume, the filter area is relatively large, the filter wind speed is small, and the resistance is not large.
The working principle of side-inserted filter cartridge pulse dust collector:
When the filter cartridge dust collector is working, under normal operation, the dusty air enters the dust collector through the top inlet, and then disperses downward through the deflector plate and passes through the filter element. The dust is blocked on the outside of the filter element, and the filtered clean air passes through the filter element. Enters the clean air chamber and exits through the outlet tube.
The filter element can be cleaned automatically and intermittently, and the method is to perform offline cleaning of a group of filter elements within a specific time. During the cleaning process of the filter element, the pulse controller connects the power supply of an electromagnetic pulse valve, so that the corresponding membrane valve ejects pulse high-pressure air, and the air passes through the filter element from the inside to the outside to remove the dust attached to the outer surface of the filter element. , the dust particles fall into the dust hopper and enter the ash collection bucket.
