The thermal pipeline automatic decontamination device is a kind of filter that directly intercepts impurities in the water, removes suspended solids and particulate matter in the water body, reduces turbidity, purifies water quality, reduces system dirt, bacteria and algae, rust, etc., to purify water quality and protect the system Precision equipment for other equipment to work normally, water enters the self-cleaning filter body from the water inlet, due to the intelligent (PLC) design, the system can automatically identify the degree of impurity deposition, and give the signal to the sewage valve to automatically discharge the sewage.

Product features of automatic decontamination device for thermal pipeline:

1. The fully automatic cleaning filter is designed with a high-inlet and low-outlet structure, and the flow rate is large, which is suitable for traditional process layouts.

2. Electric drive, the system has strong pressure bearing capacity.

3. High-precision pressure difference control design, time control, manual control cleaning.

4. Special filter unit structure design, strong and durable. The filtration accuracy is optional from 100 to 3000 microns, the filtration area is large, and the dirt holding capacity is high. Users can customize it according to the actual situation.

5. The unique cleaning design realizes low load, low water head and uniform sewage discharge. Brush cleaning, the cleaning method is simple, and the cleaning cycle is electronically monitored, which can realize automatic cleaning and sewage discharge.

6. Two adjacent cleanings, the motor rotates forward and reverse alternately, so that the stainless steel rotary brush has a long life.

7. Equipped with motor overload protection, which can effectively protect the motor.

8. The time interval between two cleanings is long, and it has the characteristics of uninterrupted water supply during cleaning and sewage discharge. The cleaning time is short and the water consumption of sewage discharge is small.

9. Easy to disassemble, install and maintain.

10. The direction of the electric control box panel can be adjusted at will to meet user requirements. The control and display interface is humanized, and the operation is very simple, without professional guidance.

11. The connection method with the user's pipeline is flange connection, and the flange adopts the national standard flange, which has strong versatility.

Precautions for automatic decontamination device for thermal pipelines:

1. The self-cleaning filter can only be used according to the rated voltage/frequency marked on the nameplate.

2. The filter should be maintained at regular intervals. Before cleaning and maintenance, be sure to disconnect the power supply of the self-cleaning filter.

3. Please make sure that the wire plug does not get wet during cleaning, otherwise the plug must be wiped dry before reconnecting the power supply.

4. Do not unplug the power cord with wet hands.

5. Self-cleaning filters are limited to use in indoor aquariums.

6. If the filter is damaged, especially if the power cord is damaged, it cannot be used.

7. Please make sure the self-cleaning filter works in the correct water level, the filter cannot be used without water