Home / News / Industry Trends /
Author:Lefilterdate:2023-04-07 11:30:40
Overview
Air filter is the use of physical barrier technology to filter the compressed air cooling treatment, is used to filter solid particles in the air, water droplets and oil mist and other aerosol impurities, so as to clean the air equipment. The working principle of the filter is that solid and liquid particles in the compressed air enter the filter and are intercepted by the filter element. After that, they condense on the surface of the filter element (inside and outside). Droplets and impurities accumulated on the surface of the filter element are precipitated to the bottom of the filter under the action of gravity and then discharged by automatic drainer or manual discharge.
Structure drawing
Performance parameter diagram
Model Number | Performance | Scope of Application |
Class C Separating oil and water separato | Completely filter solid ions 3μm or larger, Upstream gas moisture load allowed up to 25000PPM, Remove 99% moisture and 40% oil mist | Separator for the rear cooler, separator for the freeze dryer, Main route prefilter. |
Class T The supervisor walks by the colander | Completely filter solid ions 1μm or larger, Upstream gas moisture load allowed up to 2000PPM, Remove 100% moisture and 70% oil mist | Air tools, air motors, Protect automatic control system, The air system supervisor passes the filter. |
Class A High efficiency oil removal filter | Specially designed density, diameter and surface of microglass fibers Processing can filter 0.01um solid particles. The outer sponge layer absorbs and discharges the oil mist, Remove 99.999+% oil mist. | The oil air compressor is configured with FC,FT,FA filter instead Oil-free air compressor is cheaper and easy to maintain instead of nitrogen, Used in painting, electronics and other industries. |
Grade F Super high efficiency oil removal filter | Ultra-precision condensed filters for critical applications where oil-free air is supplied (airflow contact product). | Transfer agitating electronic components to make nitrogen replacement. |
Class H Oil and odor removal filter | Precision activated carbon filter 95% oil mist and hydrocarbon residue of 0.01PPM oil and gas does not contain any odor. | The food and pharmaceutical manufacturing industry transport, stirring, brewing, fermentation of respiratory gas, respiratory and diving protection of operational gas, removal of odors in the working environment. |
Installation diagram
The following figure shows the installation sequence of all levels of filters in a complete compressed air purification system